Filebeat 配置「SSL」證書加密 出現錯誤 ... ERR Failed to publish events

各位朋友大家好:
 
進行配置「Filebeat」證書加密 出現錯誤如下，有哪位朋友遇過此問題可以幫幫忙!
 
ERR Failed to publish events caused by: read tcp 192.168.1.57:56182->192.168.1.249:5043: wsarecv: An existing connection was forcibly closed by the remote host.
 
使用過「telnet IP Port」測試「ELK」服務器，確認通訊協議 OK !
 
Filebeat 配置如檔如下:  (Windows 環境)

filebeat.prospectors:

- input_type: log                      #輸入 type「log」

  paths:

    - D:\Wireshark_Log\*               #指定推送日誌「Log」文件

    

output.logstash:

  hosts: ["192.168.1.249:5043"]         #指定接收Logstash

  tls:

      certificate_authorities:

      - C:\filebeat-5.5.0-windows-x86_64\ssl\logstash\192.168.1.249.crt

      ssl.certificate:

      - C:\filebeat-5.5.0-windows-x86_64\ssl\filebeat\192.168.1.57.crt

      ssl.certificate:

      - C:\filebeat-5.5.0-windows-x86_64\ssl\filebeat\192.168.1.57.key

以下是「FileBeat」錯誤 日誌

2017-09-08T14:14:57+08:00 ERR Failed to publish events caused by: read tcp 192.168.1.57:56202->192.168.1.249:5043: wsarecv: An existing connection was forcibly closed by the remote host.

2017-09-08T14:14:57+08:00 INFO Error publishing events (retrying): read tcp 192.168.1.57:56202->192.168.1.249:5043: wsarecv: An existing connection was forcibly closed by the remote host.

2017-09-08T14:15:19+08:00 INFO Non-zero metrics in the last 30s: filebeat.harvester.closed=1 filebeat.harvester.open_files=-1 filebeat.harvester.running=-1 libbeat.logstash.call_count.PublishEvents=1 libbeat.logstash.publish.read_errors=1 libbeat.logstash.publish.write_bytes=323 libbeat.logstash.published_but_not_acked_events=5

2017-09-08T14:15:49+08:00 INFO No non-zero metrics in the last 30s

 2017.09.08 感謝 medcl 兄弟幫忙，再次修改如下:

filebeat.prospectors:

- input_type: log                      #輸入 type「log」

  paths:

    - D:\Wireshark_Log\*               #指定推送日誌「Log」文件

    

output.logstash:

  hosts: ["192.168.1.249:5043"]         #指定接收Logstash

  ssl:     # <=== 新版本貌似要改成「SSL」

      certificate_authorities:

      - C:\filebeat-5.5.0-windows-x86_64\ssl\logstash\192.168.1.249.crt

      ssl.certificate:

      - C:\filebeat-5.5.0-windows-x86_64\ssl\filebeat\192.168.1.57.crt

      ssl.key: # <===  修正為「ssl.key」      

      - C:\filebeat-5.5.0-windows-x86_64\ssl\filebeat\192.168.1.57.key

以下是「FileBeat」錯誤 日誌

2017-09-08T15:40:23+08:00 INFO Non-zero metrics in the last 30s: filebeat.harvester.open_files=1 filebeat.harvester.running=1 filebeat.harvester.started=1 libbeat.logstash.publish.read_bytes=5120 libbeat.logstash.publish.write_bytes=660 libbeat.publisher.published_events=20

2017-09-08T15:40:29+08:00 ERR Connecting error publishing events (retrying): x509: certificate is valid for 192.168.1.57, not 192.168.1.249

2017-09-08T15:40:53+08:00 INFO Non-zero metrics in the last 30s: libbeat.logstash.publish.read_bytes=1024 libbeat.logstash.publish.write_bytes=132

2017-09-08T15:41:01+08:00 ERR Connecting error publishing events (retrying): x509: certificate is valid for 192.168.1.57, not 192.168.1.249

2017-09-08T15:41:23+08:00 INFO Non-zero metrics in the last 30s: libbeat.logstash.publish.read_bytes=1024 libbeat.logstash.publish.write_bytes=132

2017-09-08T15:41:53+08:00 INFO No non-zero metrics in the last 30s

意思是說 
证书对 192.168.1.57 有效，而不是192.168.1.249 。 這裡有些不明白...

[尊重社区原创，转载请保留或注明出处]
本文地址：http://searchkit.cn/article/262